Máy tạo dòng thứ cấp 1 pha 200Amp T&R 200ADM-P

Availability In Stock

T&R 200ADM-P with 200 amp output for Test and Commisioning Engineers testing protective Relay Systems. Built in Phase Shifter, 200A 6 sec, 100A -1 min. Optional wheeled pelicase option available. Comes complete with a Calibration Certificate.

T&R 200ADM-P Current Injection Relay Test Set - SCITS 

The T&R 200ADM-P is the most recent addition to the range, and provides commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate.

The unit has a range of outputs allowing injection of currents as low as 1mA and as high as 200A. Voltages- up to 240V are available on the main outputs, allowing high impedance current relays and voltage relays to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output-. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety.

The T&R 200ADM-P is comprehensively protected by overcurrent, duty cycle and thermal trips, and keeps the user fully informed of any trip condition.

An auxiliary metering input is provided and can measure AC and DC voltage, current, frequency, and the phase between the main current output and an external voltage or current. A stabilised DC supply is provided to power the relay under test, along with an independently variable AC output.

The timing system is very flexible without compro-mising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy.

An optional pelicase unit is now also available, with the conveniently wheeled unit offering added protection and storage space.


 

The T&R 200ADM-P can be used to test many types of single phase secondary protection including:

  • Over and under current relays
  • IDMT relays
  • Over and under voltage relays
  • Auto-reclosers
  • Time delay relays>
  • Differential relays
  • Earth fault relays
  • Miniature circuit breaker
  • Power relays
  • Tripping relays
  • Thermal relays

 

  • Clear and simple user interface
  • 0-200A output current
  • True RMS digital metering with memory ammeter
  • Multi-function timing system
  • Auxiliary DC output
  • Variable auxiliary AC output
  • Auxiliary metering input
  • Large back-lit liquid crystal display
  • Thermal and over-current protection
  • Compact and portable
  • Automatic mains voltage selection
  • Optional ADMlog PCdata capture software

Main Output

  • The main output on the unit has four taps, allowing the selection of output voltages up to 240V and output currents up to 200A.
Range   Continuous   5 minutes   1 minute   6 sec
10V   25A   50A   100A   200A*
35V   10A   20A   30A    
100V   3A   5A   10A    
240V   1A   2A   3A    
240V DC   1A   2A   3A    

 

The above intermittent on times must be followed by an off time of 15 minutes, and are based on an ambient temperature of 25°C. *6 second intermittent ratings available with 230V supply.

Auxiliary AC and DC Outputs

  • A switched, isolated auxiliary DC supply is available to power the relay under test. The output is protected by a fuse and electronic trip circuit.
  • DC stabilised output 24V 1.04A
  • 48V 0.52A
  • 60V 0.42A
  • 110V 0.23A
  • 220V 0.11A

Variable AC output

  • 0-130Vac 300mA
  • The variable AC output is isolated, switched, and fuse protected.

Metering

  • The output is metered by a digital true RMS system with a memory ammeter - whenever the timer stops and the output is switched off, the current reading is held on the display.

Range Resolution Trip current Accuracy

  • 5.000A 0.001A 5.5A ±0.5%rdg+5d
  • 20.00A 0.01A 22A ±0.5%rdg+5d
  • 50.00A 0.01A 55A ±0.5%rdg+5d
  • 200.0A 0.1A 220A ±0.5%rdg+5d
  • A current trip is automatically set to 110% of full scale of the selected metering range to protect the device under test.

Auxiliary Metering Inputs

An auxiliary metering input is provided which is able to measure RMS and DC voltage or current. In addition the frequency of the external input may be measured, and the phase measured between the main output current and the auxiliary metering input.

Setting Range Resolution Accuracy

  • Volts (DC) 270.0V 0.1V ±0.7%rdg+5d
  • Volts (AC) 270.0V 0.1V ±0.7%rdg+5d
  • Amps (DC) 5.000A 1mA ±0.7%rdg+5d
  • Amps (AC) 5.000A 1mA ±0.7%rdg+5d
  • Phase 0.1° ±3°
  • Frequency 20-100Hz 0.1Hz ±0.2%rdg+1d
  • The current input is protected by a F6.3A fuse.

Timing System

  • Range 0-999.999s
  • Resolution 1ms
  • Accuracy 0.1%rdg+2d (+4d current operated mode)

The contact circuit has an open circuit voltage of 24Vdc and a short circuit current of 10mA. Each contact circuit will autoselect for normally open or normally closed contacts. A DC voltage of 24-240Vdc may also be used to trigger either timer channel. The output is automatically switched off at the end of the test to safeguard the relay under test.

The following functions are provided:

  • Mode Timer Start Timer Stop
  • Internal start Press ‘ON’ Contact 1 or 2
  • Single contact Contact 1 Contact 1
  • Dual contact Contact 1 Contact 2
  • Current operated Current > 10% Current < 10% of range
  • Pulse mode is used for setting the current level in devices sensitive to heating, and allows current to be injected for 400ms and the current recorded.

RS232

  • An RS232 port is provided to allow connection of a printer.

Protection and Safety

The unit is protected by electronic over current, duty cycle trips and thermal monitoring on the outputs and fuses on the input and regulator. The auxiliary AC output is fuse protected, and the stabilised DC output is protected by an electronic trip and fuse. An earth terminal is provided for connection to a local earth. The unit is designed to comply with BSEN61010, and is CE marked.

Supply Requirements

  • 115V±10% 50/60Hz 1ph 2300VA max
  • 230V±10% 50/60Hz 1ph 2300VA max
  • The correct range is automatically selected by the unit

Optional Pelicase Unit

  • Dimensions: 560mm x 456mm x 265mm
  • Weight: 23.3kg