• Fluke 726 Precision Multifunction Process Calibrator

  • Đăng ngày 11-07-2017 05:50:30 AM - 505 Lượt xem
  • Giá bán: Liên hệ

  • Get more calibration power

    The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.


Số lượng
  • More precise measurement and calibration source performance, accuracies of 0.01%.
  • Two separate channels; measure, source and view process signals simultaneously
  • Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
  • Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  • Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
  • Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
  • Transmitter error% calculation, interpret calibration results without a calculator
  • Perform fast linearity tests with auto step and auto ramp features
  • Power transmitters during test using 24 V loop supply and simultaneous mA measurement
  • Store frequently-used test setups for later use
  • Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
  • HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
  • Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
  • New voltage input protection design for improved reliability
  • Three-year warranty

 

Measurement Accuracy
Voltage DC
30.000 V  0.01%+ 2 mV (upper display)
20.000 V  0.01%+ 2 mV (lower display)
90.00 mV  0.01%+ 10μV
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA  0.01%+ 2 mA
Resistance
0.0 to 4000.0 Ω  +/- 0.015%
Frequency
2.0 to 1000.0 CPM  0.05 % + 0.1 cpm
1.0 to 1000.0 Hz  0.05 % + 0.1 Hz
1.00 to 15.00 kHz  0.05 % + 0.01 kHz
Sensitivity  1 V peak-to-peak-minimum
Pressure
Accuracy  from 0.025% of range using any of 29 pressure modules.
   (for detailed specifications refer to pressure modules in options and accessories)
   Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

 

Source Accuracy
Voltage DC
100.00 mV  0.01%+10 μV
20.000 V  0.01%+2 mV
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA (Source)  0.01%+ 2 μA
24.000 mA (Simulate)  0.01%+ 2 μA
Resistance
Range, Accuracy (Percent of reading + floor) and Excitation Current  5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5mA
   5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3mA
   400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA
   1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA
Frequency
2.0 to 1000.0 CPM  0.05%
1.0 to 1000.0 Hz  0.05%
1.0 to 10.0 kHz  0.25%
10.0 to 15.0 kHz  0.5%
Waveform:  5 V p-p squarewave, -0.1 V offset

 

RTDs and Thermocouples
Measure and Source Accuracy:
Cu10  1.8 °C
NI-120  0.15 °C
PT-100 (385)  0.45 °C
PT-100 (392)  0.35 °C
PT-100 (391-JIS)  0.35 °C
PT-200 (385)  0.95 °C
PT-500 (385)  0.55 °C
PT-1000 (385)  0.35 °C
RTD Resolution:  0.01 C (0.01 F)
Cu10.01 C  0.1 C (0.1 F)
J:  0.4 °C
K:  0.5 °C
T:  0.4 °C
E:  0.4 °C
R:  1.4 °C
S:  1.4 °C
B:  1.4 °C
L:  0.45 °C
U:  0.45 °C
N:  0.6 °C
XK:  0.4 °C
BP:  1.1 °C
TC Resolution  J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F

 

Specifications
Ramp Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Ramps  Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function
Voltage:  24 V
Accuracy:  10%
Maximum current:  22 mA, short circuit protected
Step Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Steps  25% of range, 100% of range

 

Environmental Specifications
Operating Temperature
   -10 °C to +55 °C
Storage Temperature
   -20 °C to +71 °C
Operating Altitude
   3000 m

 

Safety Specifications
Agency Approvals
   EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

 

Mechanical & General Specifications
Size
   200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in)
Weight
   650 g (23 oz.)
Batteries
   4 AA alkaline batteries
Battery Replacement
   Separate battery compartment, accessible without breaking calibration seall
Side port connections
   Pressure module connector, also used for remote real-time programming

 

Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập54
  • Hôm nay2,521
  • Tháng hiện tại57,486
  • Tổng lượt truy cập2,447,369
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây