• 9114, 9115A, 9116A Freeze-point furnaces

  • Đăng ngày 05-07-2017 11:11:30 AM - 106 Lượt xem
  • Giá bán: Liên hệ

  • Designed for maximum-length plateaus

    • Designed to extend plateaus
    • High-stability OEM controllers, RS-232 included
    • External cooling coils

    Several companies manufacture freeze-point furnaces. Most of these furnaces are of adequate theoretical design and of reasonable quality. Most are priced similarly. However, there is a difference that can’t be seen from specifications or price, and that’s how well the furnace performs with the freeze-point cells they’re designed to maintain.


Số lượng

9114

This furnace has a range of 100 °C to 680 °C, which includes the indium, tin, zinc, and aluminum fixed points, all in one furnace.

The 9114 furnace has an inlet for use of clean dry air or inert gas to initiate the supercool of a tin cell. Other furnaces require the user to remove the hot and fragile tin cell from the furnace by hand before cooling. In a Fluke Calibration furnace, you simply turn on your gas, monitor your cell during its supercool, and turn the gas off when the freeze begins.

The 9114 is a three-zone furnace with the best in digital controller technology. Fluke Calibration designs and builds proprietary controllers that have a reputation of being the best in the business. All of our fixed-point furnaces use them to achieve excellent stability and uniformity.

For easy access and visibility, all three zones are controlled from the front of the unit. The primary controller can be set in 0.01 °C increments, and actual temperature is readable to two decimal places.

The freezing and melting process can be automated using eight preset, user- programmable temperature settings. The top and bottom zones are slaved to the primary zone using differential thermocouples. A high-temperature PRT acts as the main control sensor for the best accuracy, sensitivity, and repeatability.

9115A

The 9115A Sodium Heat Pipe Furnace is specifically designed for maintenance of aluminum and silver freeze-point cells.

It has a temperature range of 550 °C to 1000 °C with gradients of less than ± 0.1 °C throughout. The sodium heat-pipe design provides a simple, yet uniform, single heating zone that ensures very uniform changes in states during heating and cooling.

Melting, freeze initiation, and plateau control for a variety of freeze-point cells are possible by entering up to eight set-points, ramp rates, and soak times. The controller displays temperature in degrees C or F, and temperature feedback is done via a thermocouple. Freeze-point plateaus of 8 to 10 hours are typical, and 24 hours are possible under controlled conditions.

External cooling coils are included for circulation of tap water to reduce chassis temperature and heat load to the lab. Temperature cutouts protect your SPRTs and the furnace from exposure to excessive temperatures.

9116A

The 9116A Furnace has a temperature range of 550 °C to 1100 °C and is designed for use in achieving aluminum, silver, or copper freezing point measurements. An advanced high temperature Sodium heat pipe extends usage to more than 1000 hours at 1100 °C and 5000 hours at 982 °C. The heater is embedded in a fiber ceramic insulating block. A hollow section through the center contains the heat pipe.

The minimum working temperature of the Sodium heat pipe is about 500 °C. Above that temperature, the sodium circulates throughout the tube providing a uniform temperature zone for freezing point measurements. With uniformity of ± 0.05 °C, zone adjustments are eliminated simplifying installation and increasing throughput.

The uniform temperature is maintained over the full length of the metal freeze point cell. A programmable temperature controller simplifies freeze initiation, melting and plateau control. Control stability is ± 0.15 °C, the best in the industry, enabling extension of freezing plateaus of quality fixed point cells for up to 20 hours and longer. For compatibility with automation programs, plateaus may be controlled through standard RS-232 and optional IEEE-488 PC interfaces.

Specifications

9114

9115A

9116A

Temperature Range 100 °C to 680 °C 550 °C to 1000 °C 550 °C to 1100 °C
Temperature Stability ±0.03 °C ±0.25 °C ±0.5 °C
Temperature
Uniformity
±0.05 °C
(±0.1 °C in the pre-heat
well)
+0.1 °C
 
 
±0.05 °C
 
 
Set-Point Accuracy ±0.5 °C ±3.0 °C
Set-Point Resolution 0.01 °C 0.1 °C
Display Resolution 0.01 °C
 
0.1 °C below 1000 °C
1 °C above 1000 °C
Thermal Safety Cutout
Accuracy
±5 °C
 
±10 °C
 
Heater Power End Zones:
1000 W each
(at 230 VAC nominal)
Primary Zone:
1500 W
2500 W
 
 
 
 
Exterior Dimensions
(HxWxD)
838 x 610 x 406 mm
(33 x 24 x 16 in)
Power Requirements 230 VAC (±10 %), 50/60 Hz, 1 Phase, 22 A maximum
Weight 92 kg (203 lb.) 82 kg (180 lb.)

 

Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập27
  • Hôm nay843
  • Tháng hiện tại63,199
  • Tổng lượt truy cập2,290,608
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây