• Mini Fixed-Point Cells

  • Đăng ngày 04-07-2017 11:17:40 PM - 300 Lượt xem
  • Giá bán: Liên hệ

  • Least expensive, easiest-to-use fixed-point standards

    • Lower uncertainties than comparison calibrations
    • All ITS-90 fixed points from TPW to copper
    • Reduced equipment and annual recalibration costs

    If cuteness were reason enough to buy a product, Fluke Calibration's Mini Fixed-Point Cells would win you over easily. But there’s a much better reason to buy them: they give you the least expensive, easiest-to-use fixed-point standards for your lab.

    Mini cells eliminate the need for comparison calibrations. Temperatures of fixed-point cells are constant and intrinsic, so only the electrical parameters of the sensor under calibration need to be read. If you’re calibrating industrial thermometers, thermocouples, or thermistors and want the most accurate calibration possible, these mini cells will give it to you. If you need a wide range of temperatures, mini cells cover the triple point of water (0.01 °C) and every ITS-90 point from indium (156.5985 °C) to copper (1084.62 °C).


Số lượng

Fixed-points made simple

With mini cells, realization and maintenance are simple. Mini TPW cells can be automatically realized and maintained in our 9210 Maintenance Apparatus. Realizing the triple point of water takes only five minutes, but the plateaus last all day.

The realization and maintenance of indium, tin, zinc, and aluminum cells are likewise automated through our 9260 Mini Fixed-Point Cell Furnace. Work with them at their designated freeze point, or use them at their melting point to simplify the calibration process even further. We published a paper, “The Comparison Between the Freezing Point and Melting Point of Tin," to help you understand and benefit from the easier procedure of using the melting point of your standard.

These mini cells are made from the same materials and with the same procedures as their full-size counterparts. In fact, they can achieve nearly the same uncertainty levels as Hart’s traditional fixed-point cells. Probes as short as nine inches work with these cells. The specifications table gives you the immersion depth and uncertainty for each cell.

In addition to high-accuracy calibrations of RTDs and PRTs, these cells are perfect for validating the accuracy of SPRTs. If you’re doing comparison calibrations with SPRTs, then you know the importance of occasionally checking their accuracy between their own recalibrations. Because these cells are easy to use and maintain, verification checks are simple and convenient.

Metal-cased cells

Metal-cased cells can also be used in the 9260 maintenance furnace. Because they use stainless steel cases, these cells are easier to use and transport without risk of breakage. You’ll notice that we have designed the metal cased cells with more immersion depth to give even better uncertainty too!

You’ll find these cells easier to use than you expect. You can have a free copy of Xumo Li’s paper comparing freeze-point measurements with melting-point measurements, and if you want a high level of training in using metal freeze-point cells, you can attend one of Fluke Calibration's in-depth training classes held in our lab in Utah.

Specifications
Model
Number
Fixed-
Point
Temperature
( °C)
Outside
Diameter
Inside
Diameter
Total
Cell
Height
Immersion
Depth1
Cell
Only2
Simple
Realization2
5901B-G Water T.P. 0.01 30 mm 8 mm 170 mm 117 mm 0.2 0.5
5914A Indium F.P. 156.5985 43 mm 8 mm 214 mm 140 mm 1.0 2.0
5915A Tin F.P. 231.928 43 mm 8 mm 214 mm 140 mm 1.4 3.0
5916A Zinc F.P. 419.527 43 mm 8 mm 214 mm 140 mm 1.6 4.0
5917A Aluminum F.P. 660.323 43 mm 8 mm 214 mm 140 mm 4.0 10.0
5918A Silver F.P. 961.78 43 mm 8 mm 214 mm 140 mm 7.0 n/a
5919A Copper F.P. 1084.62 43 mm 8 mm 214 mm 140 mm 15.0 n/a
5944 Indium F.P. 156.5985 41.3 mm 7.8 mm 222 mm 156 mm 0.7 1.4
5945 Tin F.P. 231.928 41.3 mm 7.8 mm 222 mm 156 mm 0.8 1.6
5946 Zinc F.P. 419.527 41.3 mm 7.8 mm 222 mm 156 mm 1.0 2.0
5947 Aluminum F.P. 660.323 41.3 mm 7.8 mm 222 mm 156 mm 2.0 4.0

Uncertainty (mK) k=2

1Distance from the bottom of the central well to the surface of the pure metal.

2"Cell Only" refers to the expanded uncertainty of the cell when realized by traditional methods and maintained using traditional maintenance devices. “Simple Realization refers to the expanded uncertainty of the cell when realized using practical methods (melting points instead of freezing points or slush ice instead of an ice mantle, for example) and maintained using Hart’s 9210 and 9260 mini cell maintenance apparatus.

 

 Từ khóa: Mini Fixed-Point Cells
Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập24
  • Máy chủ tìm kiếm2
  • Khách viếng thăm22
  • Hôm nay2,521
  • Tháng hiện tại57,450
  • Tổng lượt truy cập2,447,333
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây