• OPG1 Hydraulic Pressure Generator / Controller

  • Đăng ngày 10-07-2017 04:06:59 PM - 92 Lượt xem
  • Giá bán: Liên hệ

  • OPG1-30000 provides an alternative for generating and adjusting high liquid pressures in calibration and test systems. This compact and easy to use system provides just the right balance between the simplicity and reliabilty of manual operation and the convenience of automated features.

    • On-demand pressure up to 200 MPa (30,000 psi)
    • High resolution pressure adjustment with push button adjustment
    • Effortless operation
    • Self-contained design with compact 30 x 54 cm (12 x 21 in) footprint
    • Half-turn metering valves cannot be overtightened
    • No "end of stroke" variable volume limitations
    • High quality, long life construction
    • Advanced ergonomics
    • Applicable in both piston gauge and transfer standard based test and calibration systems

       


Số lượng

OPG1 is a compact and easy to use system for generating and adjusting pressures between zero and 200 MPa (30,000 psi) with on-demand high pressure supply and pushbutton, precision pressure control. Time consuming and tiresome manual pumping and/or screw press operation are completely eliminated.

OPG1 is the ideal solution in a variety of applications where high pressure generation and precision control are required including piston gauge and transfer standard based calibration and test systems.

OPG1 is the standard pressure generation and control component in a Fluke Calibration PG7302 high accuracy piston gauge system.

A pneumatically driven hydraulic pump provides continous high pressure oil supply to the high pressure inlet valve. The pump output pressure is set to the desired level using the front panel drive pressure regulator and indicator.

The high pressure inlet valve admits high pressure fluid from the pump for rough ascending pressure control and the high pressure outlet valve returns the fluid to the reservoir to decrease pressure. The high pressure valves are specially designed spring loaded metering valves that operate in a half-turn and cannot be overtightened.

Fine pressure adjustment is achieved using a pneumatically driven variable volume. Rather than being activated by rotational force like a screw press, the variable volume is pneumatically activated through a diaphragm.

Push button momentary valves adjust the air pressure on the diaphragm providing both effort free micro adjustment and very rapid piston movement as needed.

The physical efforts and "end of stroke" operational problems of conventional screw presses are completely eliminated. The variable volume piston position is indicated on the front panel.

OPG1 General Specifications

Pressure Range 0 to 200 MPa (30,000 psi)
Operating Test Fluid Di-2 Ethyl Hexyl Sebacate (synthetic oil)
(inquire about alternate fluids)
Test Connections DH500 (gland and collar type for coned and left hand threaded tube, equivalent to AE F250C, HIP HF4, etc.)
Drive Air Connection 1/4 in. NPT F
Pump Drive Air Max. desired hydraulic pressure/400, 350 slm (12 scfm), non-continuous flow
PDVV Drive Air 70 MPa (10,000 psi) operation 550 kPa (80 psi)
  140 MPa (20,000 psi) operation 700 kPa (100 psi)
  200 MPa (30,000 psi) operation 850 kPa (120 psi)
Reservoir Capacity 200 cc (12 cu in)
Weight (with Fluid) 27 kg (60 lbs)
Dimensions 30 cm W x 53.5 cm D x 30 cm H
(11.75 in. x 21.0 in. x 11.75 in.)

 

Danh mục sản phẩm

Facebook
Thống kê
  • Đang truy cập22
  • Hôm nay823
  • Tháng hiện tại63,179
  • Tổng lượt truy cập2,290,588
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây